A La Marzocco Linea PB 3 Group in Custom Light Lime Grey with "Low Volume" history is a rare find: a high-capacity commercial workhorse with a factory special-order finish, but with wear closer to a much smaller machine. The 3-group PB is built for cafés where multiple baristas work the bar simultaneously, so "low volume" is a meaningful value signal—but it also means you should verify why a 3-group machine saw little use and confirm the custom finish is factory-applied.
☕ Key Considerations
"Low Volume" on a 3-group is unusual—verify the story. A 3-group machine is typically purchased by high-volume cafés, so low usage often means it was a backup unit, a showroom/demo machine, or a café that closed early. Ask for the manufacture year, the service history, and the reason for sale. A bench-tested and serviced unit from a dealer carries far less risk than a private sale.
Custom Light Lime Grey is a RAL special order, not a stock color. La Marzocco offers custom colours via the RAL system, and for the Linea Mini this adds roughly 8–10 weeks to delivery . Confirm with the seller that the finish is factory powder coat, not an aftermarket wrap or repaint. Light grey shows scuffs and chips more readily than stainless, so inspect the group head surrounds, drip tray edges, and panel corners closely.
The 3-group PB is a substantial machine with serious power needs. Official specs: 95 cm wide, 59 cm deep, 53.3 cm high, 77 kg. It uses a 5 L coffee boiler (shared across all three groups) and an 11 L steam boiler, drawing 6100 W standard . One eBay listing specifies 32A single-phase for a 3-group PB . Confirm your electrical supply before committing.
One shared brew boiler—no per-group temperature flexibility. Unlike the Linea PB X (which has separate boilers per group) , the standard PB shares one coffee boiler across all groups. For a café running one house espresso and a decaf, this is fine. For multi-origin temperature flexibility, you need the PB X or a Strada/KB90.
Pricing context for a used 3-group PB. Recent eBay listings for used 3-group PB machines range from roughly $9,600 to $10,950 USD, depending on finish and condition . A brand-new stainless 3-group was listed at $17,014 USD . A custom-finish low-volume unit should sit at the upper end of the used range, perhaps $10,000–$13,000 USD, depending on year, service documentation, and warranty. Above $15k, you are approaching new-machine territory and should question the premium.
.jpg)




















